Call(XXX) XXX-XXXX
Error codes

Appliance Error Code Library for NYC Kitchens

Found the code? Match it below, then read it to us exactly, letters and all, so the tech starts at the right circuit.

Ask your questions first, decide later.

How do you read a code without guessing?

A code names the circuit that tripped, not the part to buy. The same two letters can mean different things across brands, and even across product lines from one maker: Wolf's F1 is a door lock on one oven and a food probe on another. So match the brand, then the appliance, then the code. The meanings below come from each manufacturer's own support pages.

Sub-Zero codes

CodeApplianceManufacturer's meaning
EC50 + Service flashingRefrigeratorCompressor running too long. Condenser airflow comes first.

Sub-Zero repair covers what usually causes each one.

Wolf codes

CodeApplianceManufacturer's meaning
F1 (L Series wall oven)Wall ovenLock switches not sensed within 60 seconds.
F1 (convection steam oven)Steam ovenFood probe fault.

Wolf repair covers what usually causes each one.

Thermador codes

CodeApplianceManufacturer's meaning
E15DishwasherBase pan safety switch tripped by water.
E22DishwasherFilter, pump cover, hose or air gap blocked.
E23DishwasherDrain pump jammed or failed.
E24 / E25DishwasherWater not leaving: pump cover, hose, air gap.
E27DishwasherLow supply voltage.

Thermador repair covers what usually causes each one.

Samsung codes

CodeApplianceManufacturer's meaning
22E / 21ERefrigeratorFridge fan / freezer fan.
5ERefrigeratorFridge-side defrost sensor.
83E 85E 86ERefrigeratorCompressor current or voltage out of range.
OF OFRefrigeratorShowroom cooling-off mode, a setting.
4C / 5CWasherWater in / water out.
HE / HCDryerHeating check.
LC / LEDishwasherLeak sensor wet.

Samsung repair covers what usually causes each one.

LG codes

CodeApplianceManufacturer's meaning
OE / IEWasherDrain fault / fill fault.
LEWasherMotor locked or straining.
d80 d90 d95DryerExhaust restricted roughly 80, 90, 95 percent.
Er FF / Er IFRefrigeratorFreezer fan / ice fan, usually iced.
Er CORefrigeratorDisplay board and main board lost contact.

LG repair covers what usually causes each one.

Which codes mean stop using it now?

  • Any leak code on a dishwasher (Thermador E15, Samsung LC or LE): close the valve under the sink.
  • Compressor codes on a fridge full of food: keep the doors shut and call early.
  • Oven overheating or sensor codes: leave the oven off.

Questions about codes

I cleared the code and it came back. Now what?

Leave it showing and call. Many boards store the last fault, and the tech reads it on arrival. Repeated resets can wipe that history.

My brand isn't on this list.

Read us the code with the brand and model anyway. Whirlpool, GE, Bosch, Frigidaire, Miele and KitchenAid all use codes, and the tech works from that model's own code list.

Still flashing after a reset?

Let the tech read it in person. Call with the brand, model and code, and you'll have a working appliance and a written price before any part goes in.

Call (XXX) XXX-XXXX